Stainless steel is the best material for brewing fittings. It is quite resilient and does not tarnish or rust. Although you’ll be required to pay more to buy these kinds of fittings, their high quality will demonstrate their value. Proper care and maintenance of the fittings is mandatory. This will lengthen the equipment’s life consequently allowing you to enjoy home brewed beer for a longer period of time. Since you’ll also not be making frequent replacements, you’ll end up saving money in the long run. Here are some important tips for cleaning the fittings:
1. Mild Detergent
Use only mild detergents to clean the fittings. Despite the fact that stainless steel is tough, harsh detergents may damage the chromium layer. This eventually leaves it prone to the effects of scratches and corrosion. When cleaning the fittings, dip them in water mixed with the detergent. Wipe off all stains with a soft cloth until the fittings sparkle. Remove them and rinse in warm, clean water.
2. Soapy Water
If the stains are stubborn, soak the fittings. You can soak overnight and then start the cleaning process the next day. Use soft sponge for cleaning. After all stains have been removed, rinse the fittings and leave them to drip dry. Detergent will suffice for the solution but in case they’re extra-tough, use ammonia.
3. Abrasive Detergent
Another equally effective method of cleaning stainless steel brewing fittings is by the use of abrasive detergent. However, this option should only be used if the others have failed. Baking soda mixed with water to form a paste makes an excellent abrasive detergent. Take the paste and apply on the fittings using a soft cloth. Rub continuously until all stains disappear. Be patient. The fittings will probably require more energy since the stains will have proven to be exceedingly tough.
4. Olive Oil
Take few drops of olive oil and apply onto a piece of cloth. Start buffing the fittings vigorously until all the stains have disappeared. Ensure that the olive oil covers the entire surface of the fittings. This way, all metal pores will be rejuvenated by the oil. Continue with the buffing until the fittings are clean and shining.
Cleaning the brewing fittings often is advised. This will make the equipment last longer plus help in preserving the taste of the beer. Never use bleach on stainless steel.
For care and proper maintenance of your brewing equipment, visit the website and chat with the staff. Browsing through the Camlock fittings website will provide all other relevant information.
