If
you want to know more about how to put down flooring successfully,
talk to the contractors involved. When it comes to epoxy flooring,
contractors in Arizona stress the need for the right preparation.
This does not refer to the epoxy alone. It also refers to preparing
the flooring before you apply the coating. This is the best way to
ensure you get the floor you want.
Floor Prepping
You
may order the most expensive epoxy floor coating on the market. It
may be the very best currently available. If, however, the substrate
– the cement floor, does not receive proper preparation, the epoxy
coating will not adhere to the surface properly. The floors require
proper preparation. This will involve more than a simple cleaning and
removal of obvious contaminants such as dirt, grease and grime. It
may also mean the following:
Removal of
cracks
Patching of potholes and any other
surface damage
Curing of the repaired surface
– if a fresh concrete slab is added, it must be left to cure for a
minimum of 28 days
Following this initial prep work, epoxy
flooring contractors will utilize one of two methods to “rough up”
the concrete slabs. These are:
1. Acid washing or etching:
In this process, the contractor takes a mop, dips it into a diluted
solution of muriatic acid and then mops the floor before, rinsing it
thoroughly. This is the easiest and less expensive way
2. Shot
blasting: Dallas professionals state this the more thorough way to
prepare a slab for an epoxy coating.
Contractors do not rush any of these steps.
Epoxy Flooring Contractors and Prepping
If you want a floor that is durable, you should consider the virtues of epoxy flooring in Arizona. Contractors recommend it highly, but they also provide a precaution. No matter how costly or highly recommended the product is, it will not work without the necessary preparatory work.
For state of the art epoxy flooring services in Arizona, trust American Clean & Seal to provide the best solutions.
